news

Composition of motorcycle electrical system

Update:20-01-2020
Abst:

The electrical system of a motorcycle is mainly compose […]

The electrical system of a motorcycle is mainly composed of a power supply system, electrical equipment, and control devices, and wires and connectors that connect the power supply system, electrical equipment, and control devices together. Where the electrical system is installed on the motorcycle.

Power system

The power supply system of a motorcycle is mainly composed of electric appliances such as a battery, a generator (or a magnetic motor), a generator regulator, and a rectifier. It supplies the power required by the motorcycle's electrical equipment and stores excess electrical energy.

1.The main function of the battery is: when the engine stops working or the generator output voltage is low, the battery supplies power to various electrical equipment, such as starting the engine, ignition, lighting, etc .; when the generator voltage is higher than the battery voltage, it Part of the generator's electrical energy can be converted into chemical energy and stored; when the generator is overloaded, it can supply power to the electrical equipment together with the generator.

The battery is composed of a positive plate, a negative plate, a separator, a connecting lead bar, a case, a cover, a positive pole, a negative pole, a filling hole plug and an electrolyte. Generally, a motorcycle uses a 6-volt battery (the voltage per cell 2 volts, a total of 3 divisions).

2.Magnetic motor or generator Its function is to provide power to electrical equipment and charge the battery to supplement the consumption of the battery when it is discharged. It uses a rotor equipped with a permanent magnet to make a rotating motion to create a rotating magnetic field, which causes a fixed coil to cut the magnetic field lines and generate electricity.

https://www.tspemotor.com/

0